Shop Online > Springs > Compression > Regular
S-95CS - 3" 302/304 Stainless Steel Compression Spring
| Inventory Status |
|
|---|---|
| Estimated Lead Time | |
Compression spring manufactured from 302/304 stainless steel with 10 coils and closed & ground ends. This spring features an O.D. of 1.078", and an I.D. of 0.578".
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | S-95 |
| Ends | Closed & Ground |
| Finish | None |
| Free Length | 3 in |
| Inside Diameter | 0.578 in |
| Material | 302/304 Stainless Steel |
| Outside Diameter | 1.078 in |
| Part Type | Standard |
| Rate | 1075 lbs/in |
| SKU | S-95CS |
| Solid Length | 2.5 in |
| Suggested Max Deflection | 0.28 in |
| Suggested Max Load | 304 lbf |
| Total Coils | 10 |
| Wire Diameter | 0.25 in |
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | S-95 |
| Ends | Closed & Ground |
| Finish | None |
| Free Length | 76.2 mm |
| Inside Diameter | 14.68 mm |
| Material | 302/304 Stainless Steel |
| Outside Diameter | 27.38 mm |
| Part Type | Standard |
| Rate | 188.23 N/mm |
| SKU | S-95CS |
| Solid Length | 63.5 mm |
| Suggested Max Deflection | 7.11 mm |
| Suggested Max Load | 1352.19 N |
| Total Coils | 10 |
| Wire Diameter | 6.35 mm |
The S-95CS compression spring is a meticulously engineered component designed for a wide range of industrial applications requiring reliable performance and durability. Crafted from premium 0.25" diameter 302/304 stainless steel, the S-95 spring design exhibits reliable strength across its 10 active coils, withstanding repeated compression cycles with a maximum load of 304 lbf without succumbing to fatigue.
We manufacture the S-95 design to provide a compression spring that is 3" long at rest and provides a consistent rate of 1075 lbs/in along its recommended maximum of 0.28" deflection. For best results, your application should fully accommodate the inner (0.578") and outer (1.078") diameters of this spring and be designed for its closed & ground end configuration.
We manufacture the S-95 design to provide a compression spring that is 3" long at rest and provides a consistent rate of 1075 lbs/in along its recommended maximum of 0.28" deflection. For best results, your application should fully accommodate the inner (0.578") and outer (1.078") diameters of this spring and be designed for its closed & ground end configuration.
You May Also Like
-
-
-
U0750550090CS - 90A Urethane Spring - 5.5 Inch Long, 0.6 Inch I.D., 1.38 Inch O.D.Century Spring
Urethane Springs