Shop Online > Springs > Compression > Regular
65358SCS - 0.787" 316 Stainless Steel Compression Spring
| Inventory Status |
|
|---|---|
| Estimated Lead Time | |
Compression spring manufactured from 316 stainless steel with 14.5 coils and closed & ground ends. This spring features an O.D. of 0.182", and an I.D. of 0.132".
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 65358S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 0.787 in |
| Inside Diameter | 0.132 in |
| Material | 316 Stainless Steel |
| Outside Diameter | 0.182 in |
| Part Type | Metric |
| Rate | 9.691 lbs/in |
| SKU | 65358SCS |
| Solid Length | 0.36 in |
| Suggested Max Deflection | 0.261 in |
| Suggested Max Load | 2.529 lbf |
| Total Coils | 14.5 |
| Wire Diameter | 0.025 in |
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 65358S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 19.99 mm |
| Inside Diameter | 3.35 mm |
| Material | 316 Stainless Steel |
| Outside Diameter | 4.62 mm |
| Part Type | Metric |
| Rate | 1.7 N/mm |
| SKU | 65358SCS |
| Solid Length | 9.14 mm |
| Suggested Max Deflection | 6.63 mm |
| Suggested Max Load | 11.25 N |
| Total Coils | 14.5 |
| Wire Diameter | 0.64 mm |
The 65358SCS compression spring is a meticulously engineered component designed for a wide range of industrial applications requiring reliable performance and durability. Crafted from premium 0.025" diameter 316 stainless steel, the 65358S spring design exhibits reliable strength across its 14.5 active coils, withstanding repeated compression cycles with a maximum load of 2.529 lbf without succumbing to fatigue.
We manufacture the 65358S design to provide a compression spring that is 0.787" long at rest and provides a consistent rate of 9.691 lbs/in along its recommended maximum of 0.261" deflection. For best results, your application should fully accommodate the inner (0.132") and outer (0.182") diameters of this spring and be designed for its closed & ground end configuration.
We manufacture the 65358S design to provide a compression spring that is 0.787" long at rest and provides a consistent rate of 9.691 lbs/in along its recommended maximum of 0.261" deflection. For best results, your application should fully accommodate the inner (0.132") and outer (0.182") diameters of this spring and be designed for its closed & ground end configuration.
You May Also Like
-
80108SCS - 1.13 Inch 302/304 Stainless Steel Extension SpringCentury Spring
Extension Springs Regular
-
-
CDM-281010CS - 0.402 Inch ID 1.1 Inch OD 1075 High Carbon Steel Disc Spring WasherCentury Spring
CDM Disc Springs