Shop Online > Springs > Compression > Regular
61707SCS - 1.375" 316 Stainless Steel Compression Spring
| Inventory Status |
|
|---|---|
| Estimated Lead Time | |
Compression spring manufactured from 316 stainless steel with 16.57 coils and closed & ground ends. This spring features an O.D. of 0.24", and an I.D. of 0.176".
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 61707S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 1.375 in |
| Inside Diameter | 0.176 in |
| Material | 316 Stainless Steel |
| Outside Diameter | 0.24 in |
| Part Type | Standard |
| Rate | 10 lbs/in |
| SKU | 61707SCS |
| Solid Length | 0.549 in |
| Suggested Max Deflection | 0.409 in |
| Suggested Max Load | 4.09 lbf |
| Total Coils | 16.57 |
| Wire Diameter | 0.032 in |
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 61707S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 34.93 mm |
| Inside Diameter | 4.47 mm |
| Material | 316 Stainless Steel |
| Outside Diameter | 6.1 mm |
| Part Type | Standard |
| Rate | 1.75 N/mm |
| SKU | 61707SCS |
| Solid Length | 13.94 mm |
| Suggested Max Deflection | 10.39 mm |
| Suggested Max Load | 18.19 N |
| Total Coils | 16.57 |
| Wire Diameter | 0.81 mm |
The 61707SCS compression spring is a meticulously engineered component designed for a wide range of industrial applications requiring reliable performance and durability. Crafted from premium 0.032" diameter 316 stainless steel, the 61707S spring design exhibits reliable strength across its 16.57 active coils, withstanding repeated compression cycles with a maximum load of 4.09 lbf without succumbing to fatigue.
We manufacture the 61707S design to provide a compression spring that is 1.375" long at rest and provides a consistent rate of 10 lbs/in along its recommended maximum of 0.409" deflection. For best results, your application should fully accommodate the inner (0.176") and outer (0.24") diameters of this spring and be designed for its closed & ground end configuration.
We manufacture the 61707S design to provide a compression spring that is 1.375" long at rest and provides a consistent rate of 10 lbs/in along its recommended maximum of 0.409" deflection. For best results, your application should fully accommodate the inner (0.176") and outer (0.24") diameters of this spring and be designed for its closed & ground end configuration.
