Shop Online > Springs > Compression > Regular
61155SCS - 0.563" 316 Stainless Steel Compression Spring
| Inventory Status |
|
|---|---|
| Estimated Lead Time | |
Compression spring manufactured from 316 stainless steel with 7.34 coils and closed & ground ends. This spring features an O.D. of 0.218", and an I.D. of 0.178".
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 61155S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 0.563 in |
| Inside Diameter | 0.178 in |
| Material | 316 Stainless Steel |
| Outside Diameter | 0.218 in |
| Part Type | Standard |
| Rate | 4.827 lbs/in |
| SKU | 61155SCS |
| Solid Length | 0.151 in |
| Suggested Max Deflection | 0.239 in |
| Suggested Max Load | 1.154 lbf |
| Total Coils | 7.34 |
| Wire Diameter | 0.02 in |
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 61155S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 14.3 mm |
| Inside Diameter | 4.52 mm |
| Material | 316 Stainless Steel |
| Outside Diameter | 5.54 mm |
| Part Type | Standard |
| Rate | 0.85 N/mm |
| SKU | 61155SCS |
| Solid Length | 3.84 mm |
| Suggested Max Deflection | 6.07 mm |
| Suggested Max Load | 5.13 N |
| Total Coils | 7.34 |
| Wire Diameter | 0.51 mm |
The 61155SCS compression spring is a meticulously engineered component designed for a wide range of industrial applications requiring reliable performance and durability. Crafted from premium 0.02" diameter 316 stainless steel, the 61155S spring design exhibits reliable strength across its 7.34 active coils, withstanding repeated compression cycles with a maximum load of 1.154 lbf without succumbing to fatigue.
We manufacture the 61155S design to provide a compression spring that is 0.563" long at rest and provides a consistent rate of 4.827 lbs/in along its recommended maximum of 0.239" deflection. For best results, your application should fully accommodate the inner (0.178") and outer (0.218") diameters of this spring and be designed for its closed & ground end configuration.
We manufacture the 61155S design to provide a compression spring that is 0.563" long at rest and provides a consistent rate of 4.827 lbs/in along its recommended maximum of 0.239" deflection. For best results, your application should fully accommodate the inner (0.178") and outer (0.218") diameters of this spring and be designed for its closed & ground end configuration.
