Shop Online > Springs > Compression > Regular
61152SCS - 0.375" 316 Stainless Steel Compression Spring
| Inventory Status |
|
|---|---|
| Estimated Lead Time | |
Compression spring manufactured from 316 stainless steel with 5.42 coils and closed & ground ends. This spring features an O.D. of 0.218", and an I.D. of 0.178".
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 61152S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 0.375 in |
| Inside Diameter | 0.178 in |
| Material | 316 Stainless Steel |
| Outside Diameter | 0.218 in |
| Part Type | Standard |
| Rate | 7.535 lbs/in |
| SKU | 61152SCS |
| Solid Length | 0.112 in |
| Suggested Max Deflection | 0.153 in |
| Suggested Max Load | 1.153 lbf |
| Total Coils | 5.42 |
| Wire Diameter | 0.02 in |
| Label | Value |
|---|---|
| Brand | Century Spring |
| Display Name | 61152S |
| Ends | Closed & Ground |
| Finish | Passivated |
| Free Length | 9.53 mm |
| Inside Diameter | 4.52 mm |
| Material | 316 Stainless Steel |
| Outside Diameter | 5.54 mm |
| Part Type | Standard |
| Rate | 1.32 N/mm |
| SKU | 61152SCS |
| Solid Length | 2.84 mm |
| Suggested Max Deflection | 3.89 mm |
| Suggested Max Load | 5.13 N |
| Total Coils | 5.42 |
| Wire Diameter | 0.51 mm |
The 61152SCS compression spring is a meticulously engineered component designed for a wide range of industrial applications requiring reliable performance and durability. Crafted from premium 0.02" diameter 316 stainless steel, the 61152S spring design exhibits reliable strength across its 5.42 active coils, withstanding repeated compression cycles with a maximum load of 1.153 lbf without succumbing to fatigue.
We manufacture the 61152S design to provide a compression spring that is 0.375" long at rest and provides a consistent rate of 7.535 lbs/in along its recommended maximum of 0.153" deflection. For best results, your application should fully accommodate the inner (0.178") and outer (0.218") diameters of this spring and be designed for its closed & ground end configuration.
We manufacture the 61152S design to provide a compression spring that is 0.375" long at rest and provides a consistent rate of 7.535 lbs/in along its recommended maximum of 0.153" deflection. For best results, your application should fully accommodate the inner (0.178") and outer (0.218") diameters of this spring and be designed for its closed & ground end configuration.
You May Also Like
-
-
-
CDM-158207CS - 0.323 Inch ID 0.591 Inch OD 1075 High Carbon Steel Disc Spring WasherCentury Spring
CDM Disc Springs